Solid wood floorboards on underfloor heating

White solid wood floorboards are suitable for full-surface bonding to underfloor heating systems in compliance with the relevant standards (ÖNORM B 2242-7 DIN 18356, DIN 18560) up to a width of 169mm and in compliance with the following parameters:

- The screed must be installed in accordance with standards

- Max permissible screed moisture: Cement screed 1.5% CM heated, 1.8% CM unheated Anhydrite / calcium sulfate screed 0.3% CM

- A protocol for heating the screed ready for covering must be presented

- The surface temperature of the wooden floor may be a maximum of 26°C (including under carpets, furniture,...)

- The flow temperature of the heating must be limited to 35°C. This means that temperature peaks can be avoided during times of increased energy demand (e.g. when heating up).